Currently, Avery UV DTF Stickers are only available for purchase through Amazon Custom here.
Applying UV DTF Stickers
We highly recommend cleaning and drying your surface before application.
- Peel off the back liner
- Creasing the corner can help with separating the back and top liner
- Place the sticker on a flat surface and peel back the liner slowly
- Creasing the corner can help with separating the back and top liner
- Position your sticker and carefully apply it to your clean surface
- Be sure to press down firmly and smooth it into place
- Go over the entire sticker with your fingers, a credit card, or squeegee to ensure there are no air bubbles
- Peel away the top liner slowly
- If you see any part of the design lifting, lay the liner back down to apply more pressure until the design stops lifting
- Continue to peel until the sticker is applied
Care Instructions for UV DTF Stickers
If you are using these stickers on a cup or tumbler, we recommend handwashing with dish soap. Though these UV DTF stickers are water-resistant, they not dishwasher safe.
Recommended Surfaces
Our UV DTF stickers work best on surfaces like ceramic, glass, metal, smooth plastic, cardboard and wood. We do not recommend applying these labels on surfaces such as textured plastic, rough surfaces, or fabric.
If you have additional questions, you can check out our FAQ article on UV DTF here.